Need help?Do you have a question about the MSA PrimaX P and is the answer not in the manual?
General| Operating Temperature Range | -20 °C to +50 °C |
|---|---|
| Gas Detected | O2, CO, H2S |
| Ingress Protection | IP66 |
| Measurement Principle | Electrochemical |
| Measurement Range | O2: 0-30% vol, CO: 0-500 ppm, H2S: 0-100 ppm |
| Resolution | O2: 0.1 %Vol, CO: 1 ppm, H2S: 1 ppm |
| Power Supply | Rechargeable Li-ion battery |
| Weight | 250 g |
Describes the intended applications and general usage guidelines for the PrimaX gas transmitter.
Details essential safety instructions, precautions, and warnings for safe operation of the device.
Instructions for wiring and electrical connections, including specific diagrams for PrimaX P and I.
Provides instructions and warnings for calibrating the PrimaX gas transmitter using zero and span gases.
Step-by-step guide for safely removing and installing new sensors, including necessary modes.
Details ATEX compliance, marking, gas types, and protection types for PrimaX P and PrimaX I.
Provides IECEx certification details, including type of protection and operating conditions for PrimaX P.
Specifies safety conditions for ATEX and SIL applications, including parameter tables and general guidelines.
Lists safety-relevant parameters for different gas sensors and configurations, including PFD and SFF values.
Provides a list of device error codes, their meaning, and troubleshooting guidance.
Illustrates various wiring diagrams for connecting the PrimaX to controllers and other devices.
To Next Page
