PrimaX
GB
9
avoid a delayed alarm activation, a calibration should be done when the output
current is set to 3,8 mA and "LO" is shown on the display persistently.
- The lowest range which is suitable for the alarm thresholds should be selected
for toxic gases.
- To compensate for possible deviations during measurement of flammable gas-
es a calibration factor of 1.05 has to be applied when using the CalGard for re-
mote calibration (see chapter 8.3)
1.4 MSA Permanent Instrument Warranty
Warranty
Seller warrants that this product will be free from mechanical defect or faulty work-
manship for
- Gas Transmitter: eighteen [18] months from date of shipment or one [1] year
from installation, whichever occurs first;
- Oxygen, Toxic or Catalytic Combustible Sensor: eighteen [18] months from date
of shipping or one [1] year from installation, whichever occurs first.
This warranty is applicable provided the product is maintained and used in accord-
ance with Seller's instructions and/or recommendations. This warranty does not ap-
ply to expendable or consumable parts, whose normal life expectancy is less than
one [1] year.
The Seller shall be released from all obligations under this warranty in the event re-
pairs or modifications are made by persons other than its own or authorized service
personnel or if the warranty claim results from physical abuse or misuse of the prod-
uct. No agent, employee or representative of the Seller has any authority to bind the
Seller to any affirmation, representation or warranty concerning the goods sold un-
der this contract. Seller makes no warranty concerning components or accessories
not manufactured by the Seller, but will pass onto the Purchaser all warranties of
manufacturers of such components.
To Next Page
Loading...
Need help?
General
