PrimaX
GB
65
8.6 Pipe Mounting Kit
The PrimaX can be mounted vertically by fastening its back plane using two
screws and washers. Additionally, a pipe mount kit allowing the PrimaX to be fixed
to pipes or poles is available as an accessory.
The kit consists of:
- one universal mounting plate
- one retaining plate for pipes with a diameter of 20 – 30 mm
- one retaining plate for pipes with a diameter of 30 – 50 mm
- two tightening straps for pipes with a diameter of 50 – 150 mm.
NOTE: The Pipe mounting kit not included in the EC-Type Examination Certificate
BVS 10 ATEX E 009 X
Fig. 18 Mounting plate Fig. 19 Retaining plate Fig. 20 Tightening straps
To Next Page
Loading...
