C-3
Data Logged Value
The data logged value is the next message.
• Th
e first line indicates the date and time.
• The second line shows the:
• point
• gas type and
• logged concentration.
• Th
e message is generated for every point and sent every 15
m
inutes or hourly, depending on the setup selection.
• Th
e concentration is an average or the maximum values for the
s
elected time frame; see TABLE C-3.
Alarm E
vents
Alarm events is the last message type.
• Th
e first line is the date and time.
• The second name is the:
• point
• gas name and
• alarm level.
• See TABLE C-4.
All of t
hese messages are initiated by the sync character, followed by a
binary address byte, 40 ASCII characters, and terminated with a line
feed and carriage return.
To Next Page
Loading...
