Need help?Do you have a question about the MSA ALTAIR CO and is the answer not in the manual?
General| Gas Type | Carbon Monoxide (CO) |
|---|---|
| Resolution | 1 ppm |
| Ingress Protection | IP67 |
| Sensor Type | Electrochemical |
| Battery Type | Lithium |
| Detection Principle | Electrochemical |
| Protection Rating | IP67 |
| Measurement Range | Depends on gas type |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Battery Life | 2 years typical |
| Alarm | Audible, Visual, Vibrating |
| Alarm Setpoints | Adjustable |
| Operating Humidity | 15% to 90% RH non-condensing |
| Detection Range | Depends on gas type |
| Power Supply | Battery powered |
| Humidity Range | 15-90% RH (non-condensing) |
| Certifications | ATEX, IECEx, UL |
Guidelines for the proper and intended application of the ALTAIR portable gas detector.
MSA's disclaimer regarding inappropriate product use and voided warranties.
Essential safety instructions and precautions for operating the ALTAIR gas detector.
A visual overview of the ALTAIR detector components and their functions.
Detailed explanation of the various indicators displayed on the ALTAIR instrument screen.
Information on the ALTAIR's capability to monitor carbon monoxide and hydrogen sulphide.
Details on how the ALTAIR monitors oxygen levels in the atmosphere.
Information regarding the expected duration of use and battery status indications for the ALTAIR.
Procedure for configuring low (pre-alarm) and high (main alarm) thresholds for gases.
Steps required to activate and prepare the ALTAIR detector for use.
How to access and view stored instrument data, including peak values and alarm history.
Details on logging events and connecting the ALTAIR to a PC via IR interface.
Instructions for conducting alarm tests and self-tests before each use.
Procedures for calibrating the instrument for toxic gases and oxygen.
Guide to identifying and resolving common error codes and operational problems.
Detailed specifications including weight, dimensions, alarms, battery, and sensors.
Table listing test gases required for self-test and calibration.
Information on compliance with European directives and certifications for various regions.
To Next Page
