Need help?Do you have a question about the MSA ALTAIR PRO O2 and is the answer not in the manual?
General| Gas Type | Oxygen (O2) |
|---|---|
| Sensor Type | Electrochemical |
| Display | LCD |
| Audible Alarm | Yes |
| Visual Alarm | Yes |
| Vibrating Alarm | Yes |
| Response Time | <15 seconds |
| Calibration | Automatic or manual calibration |
| Operating Temperature | -20°C to +50°C (-4°F to +122°F) |
| Alarm Setpoints | Low and high alarms |
| Operating Humidity | RH (non-condensing) |
| IP Rating | IP67 |
| Resolution | 0.1% vol |
| Protection Rating | IP66/67 |
| Measurement Range | 0-30% vol |
Proper usage guidelines for the ALTAIR PRO gas detector, emphasizing adherence to manual instructions.
Essential safety instructions and precautions for operating the ALTAIR PRO, including gas monitoring and alarm handling.
Guides users on how to manually adjust alarm setpoints for different gas types and exposure limits.
Focuses on the process of measuring toxic gases, alarm conditions, and safety warnings during monitoring.
Details the procedures for performing alarm tests and bump tests to ensure instrument functionality.
Explains the necessity and procedure for calibrating the ALTAIR PRO for both oxygen and toxic gas measurements.
Lists common error codes, their descriptions, and recommended actions for resolving instrument issues.
Instructions for replacing the sensor, including safety precautions and the requirement for subsequent calibration.
To Next Page
