Need help?Do you have a question about the MSA ALTAIR O2 and is the answer not in the manual?
General| Gas Detected | Oxygen (O2) |
|---|---|
| Sensor Type | Electrochemical |
| Resolution | 0.1% O2 |
| Response Time | <15 seconds |
| Display | LCD |
| Operating Temperature | -20°C to 50°C |
| Ingress Protection | IP67 |
| Measurement Range | 0-25% O2 |
| Alarm | Audible, Visual, Vibrating |
| Alarm Set Points | User-adjustable |
| Battery Type | Replaceable lithium |
| Operating Humidity | 15% to 90% RH non-condensing |
| Battery Life | Up to 2 years |
Crucial safety instructions and precautionary measures for safe operation and instrument integrity.
Guide to configuring low and high alarm thresholds for gases.
Procedure for activating and preparing the ALTAIR gas detector for initial use.
Procedures for performing essential alarm tests and self-tests before each operational use.
Instructions and procedures for calibrating the ALTAIR to ensure accurate gas measurements.
To Next Page