MSA Altair User Manual

Altair
®
SingleGasDetector
OperatingManual
Altair
®
Detectordeunsólogas
ManualdeOperación
Altair
®
Détecteurmono-gaz
Moded’emploi
InNorthAmerica,tocontactyourneareststockinglocation,dialtoll-free1-800-MSA-2222
TocontactMSAInternational,dial1-724-776-8626or1-800-MSA-7777
©MINESAFETYAPPLIANCESCOMPANY2011-AllRightsReserved
Thismanualisavailableontheinternetatwww.msanet.com
ParacomunicarseconellugardeabastecimientomáscercanoenAméricadelNorte,llamegratisal
1-800-MSA-2222.ParacomunicarseconMSAInternational,llameal1-724-776-8626ó1-800-MSA-7777
©MINESAFETYAPPLIANCESCOMPANY2011.Sereservantodoslosderechos.
EstemanualpuedeobtenerseenlaInternet,enelsitio:www.msanet.com.
EnAmériqueduNord,pourcontacternotredépôtleplusproche,composezlenumérogratuit
1-800-MSA-2222pourcontacterMSAInternational,composezle1-724-776-8626ou1-800-MSA-7777
©MINESAFETYAPPLIANCESCOMPANY2011-Tousdroitsréservés.
Cemanuelestdisponiblesurl’Internetauwww.msanet.com.
PRODUCTOFU.S./PRODUCTODEEE.UU. /PRODUITDESÉ-U.
MSANORTHAMERICA
1000CranberryWoodsDrive,CranberryTownship,Pennsylvania16066
(L)Rev.4 Y-HLR 10068081

MSA Altair Specifications

General

Gases Detected	Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Oxygen (O2)
Display	LCD
Alarm Type	Visual, audible, and vibration alarms
Ingress Protection	IP67
Sensor Type	Electrochemical
Operating Temperature	-20°C to 50°C (-4°F to 122°F)

Summary

Instrument Safety and Certifications

Instrument Safety Overview

Details the intended use, safety precautions, and operational guidelines for the Altair Single Gas Detector.

Critical Safety Warnings

Highlights crucial warnings to prevent serious personal injury or death during instrument use.

Using the Altair Single Gas Detector

Adjusting Alarm Setpoints

Activating the Detector

Understanding Alarms and Indicators

Altair Function Checks

Performing Alarm Tests

Conducting Bump Tests

Daily procedure to verify sensor response using test gas, ensuring proper function before use.

Calibrating the Altair Single Gas Detector

When to Calibrate

Calibrating Toxic Gas Sensors

Detailed steps for calibrating the Altair detector for Carbon Monoxide (CO) and Hydrogen Sulfide (H2S) gases.

Calibrating Oxygen Sensors

Detailed steps for calibrating the Altair detector for Oxygen (O2) measurements.

Warranty, Maintenance, and Troubleshooting

Troubleshooting Common Issues

Offers guidance on identifying and resolving common problems or error codes displayed by the instrument.