Need help?Do you have a question about the MSA ALTAIR PRO Series and is the answer not in the manual?
General| Sensor Type | Electrochemical |
|---|---|
| Display | LCD |
| Alarm | Audible, visual, and vibrating alarms |
| Operating Temperature | -20°C to +50°C (-4°F to +122°F) |
| Ingress Protection | IP67 |
| Data Logging | No |
| Gases Detected | O2 |
| Battery Life | Up to 2 years |
| Battery Type | Lithium |
| Humidity Range | 10% to 90% RH (non-condensing) |
| Certifications | UL, ATEX, IECEx |
Implicitly observe safety instructions for operator health and instrument function.
Explains the types of toxic gases the ALTAIR PRO can monitor and alarm setpoints.
Describes how the instrument monitors oxygen levels and its alarm setpoints for enrichment/depletion.
Guides users on how to manually change alarm setpoints using the instrument's buttons.
Details how to measure toxic gases, alarm conditions (low, high, STEL, TWA), and safety warnings.
Provides detailed procedures for calibrating the instrument for toxic gases and oxygen.
Lists common error codes, their descriptions, and recommended actions for resolving instrument issues.
To Next Page
