MSA ALTAIR O2 - Event Logging

GB
OPERATION MSA
18 ALTAIR Operating Manual
3.4. Event logging
The instrument can log up to 25 of the most important events.
These can be called up and displayed with a PC and the optional
MSA FiveStar
®
Link
TM
software ( Description of FiveStar
®
Link
TM
software). For
this, the instrument must be connected to the PC via an IR interface.
Stored events
 Alarm
Alarm type – Alarm value – Time/Date
 Reset alarm
Alarm type – Alarm value – Time/Date
 Calibration
(pass/fail) – Time/Date
 Self-test
(pass/fail) – Time/Date
 Error
Error type ( Troubleshooting in Section 4)
 End of life
Reason (Error messages  Troubleshooting in Section 4) – Alarm duration
(in minutes) – Life (in months) – Time/Date
Connecting instrument to PC
(1) Switch on PC and align instrument to the IR interface of the PC.
(2) Press the [TEST] key on the instrument.
 Instrument data will be displayed ( Section 3.3)
(3) Start the MSA FiveStar
®
Link
TM
software in the PC and start connection by
double-clicking "
CONNECT".
The date and time display are based on the computer time.
Make sure that the date and time on the computer are correct.