To Next PageTo Next Page
Need help?Do you have a question about the MSA SOLARIS and is the answer not in the manual?
General| Brand | MSA |
|---|---|
| Model | SOLARIS |
| Category | Security Sensors |
| Language | English |
Review safety limitations and precautions before instrument use; check calibration daily or if exposed to contaminants.
Procedure for powering on the instrument and what the initial display shows.
Conditions and indicators for a sensor missing alarm, and instrument behavior.
Simple procedure to check instrument calibration before daily use.
How the instrument measures and displays combustible gas concentrations in % LEL.
How the instrument measures and indicates oxygen levels, including alarm conditions.
Detection of Carbon Monoxide (CO) and Hydrogen Sulfide (H2S) and associated alarms.
Explanation of STEL readings and how the instrument displays and alarms for it.
Explanation of TWA readings and how the instrument displays and alarms for it.
Instructions for charging the Li ION battery, including cautions and status indicators.
Procedure for replacing batteries in the alkaline version of the instrument.
Step-by-step guide to enter and navigate the instrument's setup menu.
Instructions for performing zero and span calibration using autocalibration feature.
Contact information and advice for resolving instrument issues.
Step-by-step instructions for safely replacing gas sensors in the instrument.
