EasyManua.ls Logo

MSA SOLARIS - Oxygen Measurements (% O2)

MSA SOLARIS
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Oxygen Measurements (% O
2
) (FIGURE 2-3)
The Solaris Multigas Detector can be equipped to detect the amount of
oxygen in the atmosphere.
Two conditions trigger the alarm:
Too little oxygen (deficient)
Too much oxygen (enriched).
When the alarm setpoint is reached for either of the above:
Alarm sounds
Alarm lights flash
•% O
2
flag above the concentration flashes.
If the Oxygen alarm condition is reached while using the
instrument as a personal or area monitor, leave the area imme-
diately; the ambient condition has reached a preset alarm
level. If using the instrument as an inspection device, do not
enter the area without proper protection. Failure to follow this
warning will cause exposure to a hazardous environment
which can result in serious personal injury or death.
""
WARNING
Figure 2-3. Instrument in Oxygen Alarm
2-8

Table of Contents

Related product manuals