• Turn-ON or
• MIN reading was reset.
• MIN appears in the upper portion of the display.
• To reset the MIN Reading:
1. Access the Min page.
2. Press the RESET button.
Short Term Exposure Limits (STEL) (FIGURE 2-9)
• The STEL flag appear in the upper portion of the display to show
the average exposure over a 15-minute period.
• When the amount of gas detected by the Solaris Multigas Detector
is greater than the STEL limit:
• Alarm sounds
• Alarm lights flash
• STEL flashes.
To Reset the STEL:
1. Access the STEL page.
2. Press the RESET button.
The STEL alarm is calculated over a 15-minute exposure. Calculation
examples are as follows:
• Assume the Detector has been running for at least 15 minutes:
Figure 2-9. Exposure Page with STEL Alarm
2-14
To Next Page
Loading...
