MSA SOLARIS - Minimum Readings (MIN) (FIGURE 2-8); Peak Readings (PEAK) (FIGURE 2-7)

Peak Readings (PEAK) (FIGURE 2-7)
• PEAK appears in the upper portion of the display to show the
highest levels of gas recorded by the Solaris Multigas Detector
since:
• Turn-ON or
• Peak readings were reset.
• To Reset the Peak Readings:
1. Access the Peak page.
2. Press the RESET button.
Minimum Readings (MIN) (FIGURE 2-8)
• This page shows the lowest level of oxygen recorded by the
Solaris Multigas Detector since:
Figure 2-8. MIN Reading on the Display
Figure 2-7. PEAK Readings on the Display
2-13