MSA DR-209M - 3 Technical Service; General Instructions; Safety Features; Maintenance Routine

Universal digital repeater
DR-209M
Page 37
3 TECHNICAL SERVICE
3.1 GENERAL INSTRUCTIONS
The TS shall be provided by the staff acquainted with its composition, structure
and operation features.
In order to provide safe and reliable operation for the Product, the staff shall main-
tain a schedule of the TS:
a. technical service №1 (TS-1) – semi-annual TS;
b. technical service №2 (TS-2) – annual TS.
TS-1 shall be organized and controlled by a person in charge, and provided by the
staff on the running equipment.
TS-2 shall be organized and controlled by a person in charge, and provided by the
staff on the running equipment.
3.2 SAFETY FEATURES
While maintaining the TS, observe cl. 4.2.
3.3 MAINTENANCE ROUTINE
The list of works for all types of TS is given in Table 26.
Maintenance routine procedure is given in CL, represented in
Tables 27 – 29.
A recommended amount of consumables required for the TS is shown in Table 2.
Table 26 – List of works by TS types
CL №
Work
Type of TS
ТS-1
ТS-2
1
Visual check of the Product
+
+
2
Completeness check, SPTA kit condition check and check of
operational documentation
–
+
3
Product operability check
–
+
Note:
1 “+” – work is obligatory.
2 “–” – work is not obligatory.