Page 9
2.3 USAGE OF THE PRODUCT
2.3.1 The Product is delivered with factory settings; the settings may be changed
if necessary.
2.3.2 The Product’s operation modes
The Product ensures operation in the following modes:
a. operation (working) mode;
b. configuration / Settings mode;
c. service mode.
The operation mode ensures intended use of the Product. In this mode the Product
ensures:
a. data display (to monitor parameters);
b. data transmission in NMEA network;
c. emergency alarm, see Table 11.
The Product in the operation mode can be used as:
a. gyrocompass repeater;
b. log repeater;
c. depth finder repeater;
d. inclinometer repeater;
e. weather sensor or wind sensor/transducer repeater;
f. other systems and devices repeater;
g. repeater of several devices and systems simultaneously.
The configuration mode prepares the Product for use, providing the following:
a. prior configuration of the Product;
b. download of OS updates.
The service mode is used only by the manufacturer’s service specialists / engi-
neers or their authorized representatives (after entering service password) to ensure the
following:
a. operation with the Product at the OS level;
b. manual OS update;
c. expanded diagnostics of troubles.
To Next Page
Loading...