Need help?Do you have a question about the MSA PrimaX Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Ingress Protection | IP66 |
| Power Supply | 24 V DC |
| Output Signal | 4-20 mA, HART |
| Sensor Type | Electrochemical, Catalytic Bead, Infrared |
| Certifications | ATEX, IECEx, SIL 2 |
| Gas Detection | Multiple gases (configurable) |
| Measurement Range | Varies by gas and sensor type |
Details on proper device usage and manufacturer liability.
Essential safety instructions and precautions for device installation and operation.
Outlines the warranty terms and conditions for the instrument and sensors.
Distinguishes between PrimaX P and PrimaX I models and their features.
Provides a general description of the device's components and functionality.
Instructions for physically mounting the device, including backplate removal and wall/pipe mounting.
Details on connecting the device electrically, including diagrams for PrimaX P and I.
Guide to initial device startup, display elements, and menu navigation using the keypad.
Explains calibration steps, menu items, and safety warnings related to calibration gas.
Details on accessing device info, setting up calibration, and sensor exchange.
Information on device password protection and changeable parameters.
Explains the HART communication protocol and the optional relay module for alarms.
Details on configuring relay settings, testing, and understanding output states.
Step-by-step guide for safely removing and replacing the device's sensor.
Detailed specifications for enclosure, dimensions, power, and environmental operating conditions.
Guidelines for selecting appropriate cables and their maximum lengths for reliable operation.
Lists gases the device can detect, performance specs, and response times.
Information on how other gases may affect sensor readings and calibration examples.
Details ATEX markings, certificates, and standards for the PrimaX P model.
Outlines IECEx certification details and markings for the PrimaX P and I models.
Specifies safety conditions for ATEX and SIL applications, including parameter tables.
Provides detailed safety relevant parameters for different applications and configurations.
Describes accessories like calibration caps and sensor guards for optimal use.
Details on remote calibration adapters (CalGard) and flow-through adapters for sampling systems.
Covers duct mounting, pipe mounting kits, sensor tags, sunshields, and HART cables.
Lists part numbers for accessories, replacement parts for PrimaX models, and available sensors.
Explains device output states, calibration errors, error codes, and timeouts.
Provides mechanical drawings and details for cable gland installation.
Crucial diagrams illustrating electrical connections for different PrimaX configurations and safety barriers.
To Next Page
