Need help?Do you have a question about the MSA PrimaX and is the answer not in the manual?
General| Gas Type | Oxygen, Combustibles |
|---|---|
| Ingress Protection | IP66 |
| Certifications | UL, ATEX, IECEx |
| Output | 4-20 mA, HART |
| Housing Material | Stainless steel |
| Sensor Type | Electrochemical, Infrared |
| Power Supply | 24 VDC nominal (18-30 VDC) |
Explains the intended use and application of the PrimaX Gas Transmitters.
Outlines crucial safety instructions for device operation and maintenance.
Details the physical steps for mounting the PrimaX device.
Specific wiring instructions for the PrimaX P model.
Details the process and requirements for calibrating the gas transmitter.
Covers startup display and menu sequence for relay functions.
Provides instructions for safely replacing the device's sensors.
Details ATEX certifications and markings for PrimaX P.
Lists common calibration errors and their troubleshooting steps.
Details error codes displayed on the device and their causes/solutions.
Illustrates different wiring configurations for PrimaX I models.
To Next Page
