MSA PrimaX - Flow through Adapter

O
2
t
50
≤ 10 s t
90
≤ 45 s
CO
t
50
≤ 15 s t
90
≤ 45 s
H
2
S
t
50
≤ 20 s t
90
≤ 60 s
8.4 Flow Through Adapter
Figure 16 Flow through adapter
The flow through adapter is for use with a pumped sampling system.
Gas inlet/outlet thread: 1/8” NPT
Gas flow rate: 1.0 l/min ± 20%
Using the Flow Through Adapter will extend the response time, depending on the gas flow
rate and the length of the tubes. Only the pressure range from 800 to 1200 hPa is allowed.
The gas flow has to be monitored.
GB PrimaX 56
8 Accessories