MSA PrimaX - Description; Identifying the Unit; Overview

2 Description
2.1 Identifying the Unit
PrimaX P PrimaX I
flameproof version
general purpose version, or
intrinsically safe version
Figure 1 PrimaX Gas Transmitter
PrimaX P
The PrimaX P is a gas transmitter with an aluminum enclosure. This is a flameproof version for the detection
of combustible or toxic gases or oxygen.
PrimaX I
The PrimaX I is a gas transmitter with a plastic enclosure. It is available as a general purpose version [not
intended for hazardous area] or intrinsically safe version. Both versions are designed for a detection of toxic
gases or oxygen.
2.2 Overview
The device is factory-calibrated and delivered ready for installation. Each device is configured and calibrated
for only one specific gas or vapor.
9 PrimaX GB
2 Description