MSA Workman® Tripod
17
US
3.1.4 Exterior Clearance and Interior Headroom
There must be sufficient exterior clearance above the anchorage to fully erect the Workman Tripod.
This clearance is given in section 2.1.1 . Interior headroom depends upon the system components
(optional accessories) that may be attached to the Workman Tripod head. Refer to the User Instruc-
tions supplied with each system component to determine the effect on overhead clearance due to such
installation.
3.1.5 Requirements for additional Anchorages and Anchorage Connectors
The Workman Tripod is intended for use by a single person. Other personnel working in this immediate
area as part of a support team will require separate and independent safety systems depending on
their purpose and work function. Each person working in a given area must have systems provided to
suit the hazards that may be present. This determination must be made by a qualified safety engineer
in accordance with sections 2 and 3.1 of these instructions, or corresponding sections of User Instruc-
tions from any optional components.
Fig. 4 Leg base clearance
A: Exterior clearance
B: Interior headroom
To Next Page
Loading...
