MSA WORKMAN - Erecting, Compacting, and Installing

US
MSA Workman® Tripod
18
3.1.6 Clear Space in Fall Path
Make certain that enough clearance is available in all potential fall paths to prevent striking an object.
The amount of clearance needed depends upon the type of connecting subsystem used, and the loca-
tion of the anchorage or anchorage connector. Consult the manufacturer’s instructions for the partic-
ular connecting subsystem or component for clearance needed.
3.2 Inspection Before Each Use
Inspect the Workman Tripod to verify that it is in serviceable condition. Examine every inch of the
Workman Tripod for severe wear, missing or broken elements, corrosion, or other damage. Do not use
the Workman Tripod if inspection reveals an unsafe condition.
3.3 Erecting and Compacting Workman Tripod
WARNING!
Do not open the confined space access cover before completing installation of the Workman Tripod
and all other system components.
Failure to follow this warning can result in serious injury or death.
Before Fall Free Fall Suspension After Fall Arrest
A Fall arrester 1
B Tripod anchorage connector 2
C Anchorage surface 3
D Clearance
E Closest object in fall path