BIOS Setup
3-15
the next memory location. The bigger the size, the faster the
DRAM performance. Settings: 4, 8 (QW).
AGP Aperture Size
This setting controls just how much system RAM can be allocated to AGP for
video purposes. The aperture is a portion of the PCI memory address range
dedicated to graphics memory address space. Host cycles that hit the aperture
range are forwarded to the AGP without any translation. The option allows the
selection of an aperture size of 4MB, 8MB, 16MB, 32MB, 64MB, 128MB, and
256 MB.
Internal Graphics Select
The field specifies the size of system memory allocated for video memory.
Settings: 512KB, 1MB, 8MB, Disabled.
Display Cache Window Size
This setting controls just how much system RAM can be allocated to onboard
video controller for video purposes. The display cache window is a portion of
the PCI memory address range dedicated to graphics memory address space.
Host cycles that hit the aperture range are forwarded to the onboard video
device without any translation. Settings: 64MB, 128MB.
***** Display Setting *****
Boot Display Device
Use the field to select the type of device you want to use as the display(s) of
the system. Setting options: Auto, CRT, TV, EFP, CRT+EFP. The option EFP
refers to the LCD display.
TV Standard
Select the TV standard which is used as the video signal format of your TV if
you have connected a TV to the system. Three TV standards are available for
the field:
PAL PAL format. This is a dominant standard in Europe.
NTSC NTSC format. This format is used by many American
and Asian countries including US and Japan.
SECAM SECAM format. The format is implemented in some coun-
tries like France.
To Next Page
Loading...
