To Next Page

To Previous Page

2-5

Hardware Setup

Installing the CPU Fan

As processor technology pushes to faster speeds and higher

performance, thermal management becomes increasingly important. To dissi-

pate heat, you need to attach the CPU cooling fan and heatsink on top of the

CPU. Follow the instructions below to install the Heatsink/Fan:

2. Position the heatsink onto the reten-

tion mechanism.

1. Locate the CPU and its retention

mechanism on the mainboard.

3. Mount the fan on top of the heatsink.

Press down the fan until its four clips

get wedged in the holes of the reten-

tion mechanism.

4. Press the two levers down to fasten

the fan. Each lever can be pressed

down in only ONE direction.

retention mechanism

levers

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE Neo2-P Platinum Edition and is the answer not in the manual?

MSI 865PE Neo2-P Platinum Edition Specifications

General