To Next Page

To Previous Page

2-22

MS-6728 ATX Mainboard

The mainboard provides the following jumpers for you to set the

computer’s function. This section will explain how to change your mainboard’s

function through the use of jumpers.

Clear CMOS Jumper: JBAT1

There is a CMOS RAM on board that has a power supply from external

battery to keep the data of system configuration. With the CMOS RAM, the

system can automatically boot OS every time it is turned on. If you want to

clear the system configuration, use the JBAT1 (Clear CMOS Jumper ) to clear

data. Follow the instructions below to clear the data:

Jumpers

MSI Reminds You...

You can clear CMOS by shorting 2-3 pin while the system is off.

Then return to 1-2 pin position. Avoid clearing the CMOS while

the system is on; it will damage the mainboard.

JBAT1

Clear Data

Keep Data

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE Neo2-P Platinum Edition and is the answer not in the manual?

MSI 865PE Neo2-P Platinum Edition Specifications

General