To Next Page

To Previous Page

3-20

MS-6728 ATX Mainboard

Onboard I/O is configured by AMIBIOS. All IRQs used by onboard I/O

are configured as PCI/PnP. If all IRQs are set to ISA/EISA, and IRQ 14/15

are allocated to the onboard PCI IDE, IRQ 9 will still be available for PCI

and PnP devices. Available settings: ISA/EISA and PCI/PnP.

Set DMAs to PnP or ISA

Press <Enter> to enter the sub-menu and the following screen appears:

DMA Channel 0/1/3/5/6/7

These items specify the bus that the system DMA (Direct Memory

Access) channel is using.

The settings determine if AMIBIOS should remove a DMA from the

available DMAs passed to devices that are configurable by the system

BIOS. The available DMA pool is determined by reading the ESCD NVRAM.

If more DMAs must be removed from the pool, the end user can reserve

the DMA by assigning an ISA/EISA setting to it.

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE Neo2-P Platinum Edition and is the answer not in the manual?

MSI 865PE Neo2-P Platinum Edition Specifications

General