E-3-5
BIOS Setup
Performance Mode
This item allows you to control the MAT (memory acceleration technology) function of
CPU. MAT is MSI
TM
’s exclusive technology, specializing in optimizing the data transfer
rate among CPU, north bridge chip and memory, and also in procuring better memory
performance and bandwidth up to 10%. Selecting [Fast] will enable MAT. Please be
noted that not every memory is compatible with MAT. If the system fail to reboot for
four times, the BIOS will be restored to the Default value ([Normal]). Setting options:
[Normal], [Fast], [Turbo (MAT)], [Ultra Turbo (MAT)].
Use this menu to specify your settings for frequency/voltage control.
Frequency/Voltage Control
MSI Reminds You...
1. Even though MAT is easy to use, it doesn't mean there's no risk at
all. We recommend you to check if your memory is able to bear
MAT setting or not before deciding to always use it. If your system
will be unstable or reboot incidentally after switching to [Fast],
please switch back to [Normal]. Moreover, if you want to conduct
FSB overclocking, you should set MAT as [Normal].
2. Meanwhile, for security reason, there are two functions to protect
BIOS and protect user’s system from crashing:
(a) There is a safe hotkey "Ins" in BIOS. If the overclocking or/and
MAT fails to run, you can press "Ins" key while rebooting system
to restore to the BIOS Defaults.
(b) If your system reboot for four times continually, the BIOS will
be restored to the Defaults (Normal), too.
To Next Page
Loading...
