To Next Page

To Previous Page

Introduction to DigiCell

E-4-15

Left-wing: Current system status

In the left sub-menu, you can configure the settings of FSB, Vcore, Memory Voltage

and AGP Voltage by clicking the radio button next to each item and make it available

(the radio button will be lighted as yellow when selected), use the “+” and “-” buttons

to adjust, then click “OK” to apply the changes. Then you can click “Save” to save

the values you just configured.

Also you may click “Auto” to start testing the maximum CPU overclocking value. The

CPU FSB will automatically increase the testing value until the PC reboots. Or you may

click “Default” to restore the default values.

Right-wing: PC hardware status during real time operation

In the right sub-menu, here you can configure the PC hardware status such as CPU

& system temperatures and fan speeds. You may use the scroll bars to adjust each

item, then click “OK” to apply the changes. The values you set for the temperatures

are the maximum thresholds for the system for warnings, and the value for fan

speeds are the minimum thresholds.

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE Neo3-F and is the answer not in the manual?

MSI 865PE Neo3-F Specifications

General