Need help?Do you have a question about the MSI B75A-G43 GAMING series and is the answer not in the manual?
General| CPU Socket Type | LGA 1155 |
|---|---|
| Chipset | Intel B75 |
| Maximum Memory Supported | 32GB |
| PCI Express 3.0 x16 | 1 |
| PCI Express 2.0 x16 | 1 |
| PCI Express x1 | 2 |
| SATA 6Gb/s | 1 |
| SATA 3Gb/s | 5 |
| Form Factor | ATX |
| Audio | Realtek ALC892 |
| Memory Slots | 4 |
| Memory Standard | DDR3 |
| USB 2.0 | 8 (4 on back panel, 4 via internal headers) |
| LAN | Realtek 8111E |
Essential guidelines for safe operation and handling of the motherboard.
Important notes on preventing CPU overheating and safe CPU replacement procedures.
Step-by-step instructions for correctly installing the CPU into the socket.
Instructions for attaching the CPU cooler and heatsink assembly.
Steps for firmly attaching the heatsink to the motherboard.
Instructions for connecting the CPU fan cable to the motherboard header.
Ensuring the heatsink is properly secured and the fan cable is connected.
Critical reminders about handling CPU socket pins and ensuring proper cooler seal.
Details the main ATX 24-pin power connector for supplying motherboard power.
Explains the ATX 8-pin connector for delivering 12V power to the CPU.
Step-by-step guide for correctly inserting memory modules into DIMM slots.
Describes the high-speed SATA interface for connecting storage devices like HDDs and SSDs.
Details SATA speeds (6Gb/s, 3Gb/s) for different models and important connection notes.
Details front panel connectors for switches, LEDs, and speaker, with orientation notes.
Instructions for clearing CMOS settings using the JBAT1 jumper.
Step-by-step guide for using the Total Installer utility to install drivers and software.
Procedure to access the BIOS setup menu upon system startup.
Introduction to the OC menu for advanced users to adjust overclocking settings.
Adjusting CPU Base Frequency, CPU Ratio, and DRAM Frequency for overclocking.
Configuration of EIST, Intel Turbo Boost, Enhanced Turbo, and OC Genie.
Adjusting CPU Core Voltage and DRAM Voltage for stability.
Instructions for updating the motherboard BIOS using the Live Update utility.
Steps to configure BIOS for IDE mode to install Windows XP.
Guide to creating a bootable floppy disk with Intel AHCI drivers for Windows XP.
Detailed steps for installing Windows XP using AHCI mode with the prepared driver disk.
To Next Page