To Next Page

To Previous Page

Resetting BIOS

You might need to restore the default BIOS setting to solve certain problems. There

are several ways to reset BIOS:

∙ Go to BIOS and press F6 to load optimized defaults.

∙ Short the Clear CMOS jumper on the motherboard.

⚠

Important

Be sure the computer is off before clearing CMOS data. Please refer to the Clear

CMOS jumper section for resetting BIOS.

Updating BIOS

Updating BIOS with M-FLASH

Before updating:

Please download the latest BIOS file that matches your motherboard model from MSI

website. And then save the BIOS file into the USB flash drive.

Updating BIOS:

1. Switch to the target BIOS ROM by Multi-BIOS switch. Please skip this step if your

motherboard doesn’t has this switch.

2. Insert the USB flash drive that contains the update file into the USB port.

3. Please refer the following methods to enter flash mode.

• Reboot and press Ctrl + F5 key during POST and click on Yes to reboot the system.

Press <Ctrl+F5> to activate M-Flash for BIOS update.

• Reboot and press Del key during POST to enter BIOS. Click the M-FLASH button

and click on Yes to reboot the system.

4. Select a BIOS file to perform the BIOS update process.

5. When prompted click on Yes to start recovering BIOS.

6. After the flashing process is 100% completed, the system will reboot automatically.

Questions and Answers:

Need help?

Do you have a question about the MSI B760M PROJECT ZERO and is the answer not in the manual?

MSI B760M PROJECT ZERO Specifications

General