MSI CX600 - Page 10

CX600（MS-1682）Disassemble Guide
6、KEYBOARD
6.1：Before remove K/B, firstly remove the
Hinge Cover;
Component P/N Qty
Hinge Cover
307-682E221-Y31 1
6.2：Remove the 5 screws(M2*3mm);
Attention: the screw driver torque is: 1.5-2.0Kgf-cm
Component P/N Qty
Screw E43-1203003-H29 5
6.3 ： Firstly push connector according to the
direction as pic shows; then remove the cable;
Component P/N Qty
Keyboard S1N-3UUS1B1-C54 1