CX600（MS-1682）Disassemble Guide
10、 LCD MODULE ASSY
10.1：Remove the 8 cover rubber
Component P/N Qty
UP Rubber E2Y-6810111-Y40 4
DOWN Rubber E2Y-6740611-Y40 4
10.2： Remove the 4screw (M2.5*5mm). When
removing the LCD bezel, should begin from the
two sides, then the upside to downside;
Attention: the screw driver torque is 2.0-2.5Kgf-cm
Component P/N Qty
Screw E43-1255007-H29 4
LCD Bezel 307-681B211-Y31 1
To Next Page
Loading...
