CX600（MS-1682）Disassemble Guide
10、 LCD MODULE ASSY
10.3：Remove the 3 magnet on LCD cover;
Component P/N Qty
LCD Cover Magnet E2Y-2210512-SF7 2
LCD Cover Magnet E2Y-6710411-SF7 1
10.4：Remove INVERTER
Component P/N Qty
INVERTER S78-3300470-SG3 1
10.5：Remove the 6 screws (M2.5*5mm); Remove
the two LCD hinges on two sides;
Attention: the screw driver torque is 2.0-2.5Kgf-cm
Component P/N Qty
Screw E43-1255007-H29 6
Hinge R E2M-6810411-G60 1
Hinge L E2M-6810511-G60 1
To Next Page
