CX600（MS-1682）Disassemble Guide
10、 LCD MODULE ASSY
10.6：Remove the 2 screws (M2.5*5mm)
Attention: the screw driver torque is 2.0-2.5Kgf-cm
Component P/N Qty
Screw E43-1255007-H29 2
10.7：Remove the display module from LCD cover;
10.8：Remove the LVDS cable from display module;
Component P/N Qty
LVDS Cable K19-3028001-H39 1
To Next Page
Loading...
