2-3
Hardware Setup
CPU (Central Processing Unit)
Important
1. Overheating will seriously damage the CPU and system. Always make
sure the cooling fan can work properly to protect the CPU from overheating.
2. Make sure that you apply an even layer of heat sink paste (or thermal tape)
between the CPU and the heatsink to enhance heat dissipation.
3. While replacing the CPU, always turn off the power supply or unplug the
power supply’s power cord from the grounded outlet first to ensure the
safety of CPU.
The mainboard supports Intel
®
Core 2 Duo/ Core Duo/ Core Solo/ Celeron M/
Celeron LV 423 BGA (with BGA Passive Cooler) processors in Socket M. When you
are installing the CPU, make sure the CPU has a heat sink and a cooling fan
attached on the top to prevent overheating. If you do not have the heat sink and
cooling fan, contact your dealer to purchase and install them before turning on the
computer.
To Next Page
Loading...
Need help?
General
