7
Mouse
Keyboard
LAN
Audio Ports
USB 2.0 Type-A
USB 3.2 Gen 1
5Gbps Type-A
DVI-D Port DisplayPort
Serial Port
VGA Port
Status
Off No link
Yellow Linked
Blinking Data activity
Status
Off 10 Mbps connection
Green 100 Mbps connection
Orange 1 Gbps connection
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
Click on the to open the dialog
below.
Select .
Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device
is current connected.
To Next Page
Loading...
