MSI H55M-E32 series - Component Identification and Layout

En-8
MS-7636 Mainboard
English
MS-7636 Mainboard
English
Important
Con󰘰rm if your CPU cooler is 󰘰rmly installed before turning on your system.
Do not touch the CPU socket pins to avoid damaging.
•
•
Alignment Key
Visually inspect if the CPU is seated
well into the socket. If not, take out
the CPU with pure vertical motion
and reinstall.
5.
Engage the load lever while pressing
down lightly onto the load plate.
6.
Secure the lever near the hook end
under the retention tab.
7. Make sure the four hooks are in por-
per position before you install the
cooler.
8.