3-14
MS-7207 M-ATX Mainboard
Integrated Peripherals
USB 1.1 Controller
This setting disables/enables the USB 1.1 controller. Setting options: [Enabled],
[Disabled].
USB 2.0 Controller
Set to [Enabled] if you need to use any USB 2.0 device in the operating system that
does not support or have any USB 2.0 driver installed, such as DOS and SCO Unix.
Setting options: [Disabled], [Enabled].
USB Device Legacy Support
Set to Enabled if your need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS and SCO
Unix. Set to Disabled only if you want to use any USB device other than the USB
mouse. Setting options: [Auto], [Disabled].
Onboard Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
To Next Page
Loading...
