1-8
MS-6702 ATX Mainboard
MSI Reminds You...
To ensure that Cool’n’Quiet function is activated and will be
working properly, it is required to double confirm that:
1. Check the serial number printed on the top of CPU. On the
top of CPU, there are three lines listed under AMD Athlon
TM
.
Find the 13 characters of the first line, and locate the last one
from those 13 characters. If the last character is “O” or after
“O” (such as P, Q, R, and so on), that means this CPU supports
Cool’n’Quiet function. On the contrary, if the last character
is before “O”, that means this CPU does not support
Cool’n’Quiet function.
2. Run BIOS Setup, and select Frequency/Voltage Control.
Under Frequency/Voltage Control, find Cool’n’Quiet
Support, and set this item to “Enable.”
3. Enter Windows, and select [Start/Settings/Control Pannel/
Power Options.] Enter Power Options Properties tag, and
select Minimal Power Management under Power schemes.
To Next Page
Loading...
