MSI MEG X399 CREATION - Page 42

42
Overview of Components
+
+
PCIE_PWR1
JCASE
JMB
11
12
13
9
10
9. Insert the M.2 XPENDER-AERO into an PCIe x16 slot (PCI_E1 or PCI_E4).
10. Use the screw to secure the M.2 XPENDER-AERO.
11. Connect the PCIE_PWR1 connector to the power supply.
12. Connect the case’s HDD LED cable to the JCASE connector.
13. Using the supplied HDD LED cable to connect the JMB connector and HDD LED
pins (pin 1 & pin3) of JFP1.
HDD LED
JFP1
1
3