26
Overview of Components
30º30º
5
6
M.2 screw
Thermal pad
M.2 Plate
2280 standoff
3
4
Important
Skip step 6, if you install 22110 M.2 SSD into M2_1 slot.
3. For 22110 M.2 SSD, please remove the standoff on the 2280 hole to avoid damage
to the M.2 SSD.
For 2242/ 2260/ 2280 M.2 SSD, please skip this step.
4. Remove the protective films from the thermal pads of M.2 plate
5. Insert your M.2 SSD into the M.2 slot at a 30-degree angle.
6. Take out the M.2 screw from the package, and place the M.2 screw in the notch on
the trailing edge of the M.2 SSD and tighten it into the standoff.
To Next Page
Loading...
