3-17
Setting BIOS Function
Set WakeUp Events
Press <Enter> to enter the sub-menu and the following screen appears:
Wake Up On PME, Wake Up By Keyboard (with “Wake-Up Key” and
“Wake-Up Password”), Wake Up By PS/2 Mouse
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected. Settings: Enabled, Disabled.
Resume By Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the soft off (S5) state. Settings: Enabled, Disabled.
Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to Enabled, the system will automatically re-
sume (boot up) on a specific date/hour/minute/second specified in these
fields. Available settings for each item are:
Alarm Date 01 ~ 31, Every Day
Alarm Hour 00 ~ 23
Alarm Minute 00 ~ 59
Alarm Second 00 ~ 59
To Next Page
Loading...
Need help?
General