Getting Started
1-5
Quick Components Guide
Component Function Reference
DDR1~3 Installing DDR SDRAM modules See p. 2-5~2-6
Socket 478 Installing CPU See p. 2-2~2-4
CPUFA Connecting to CPUFAN See p. 2-16
SYSFA Connecting to SYSTEM FAN See p. 2-16
ATX Power Supply Installing power supply See p. 2-7
JPW1 Connecting to 12V power connector See p. 2-7
IDE1 & IDE2 Connecting to IDE hard disk drive See p.2-14
IDE3 & IDE4 Connecting to IDE RAID HDD See p.2-15
FDD1 Connecting to floppy disk drive See p.2-13
JUSB1/3/4 Connecting to USB interfaces See p. 2-21~2-22
PCI Slot 1~5 Installing expansion cards See p. 2-27
AGP Slot Installing AGP cards See p. 2-27
CNR Slot Installing CNR cards See p. 2-27
JMOD1 Connecting to modem module See p. 2-19
JBAT1 Clearing CMOS data See p. 2-26
JFP1/2 Connecting to case See p. 2-18
JIR1 Connecting to IR module See p. 2-17
JAUD1 Connecting to audio connector See p. 2-20
JDB1 Connecting to D-Bracket™ (optional) See p. 2-24
JSP3 Connecting to SPDIF interface (optional
S-Bracket)
See p. 2-25
JCD1 Connecting to CD-ROM audio connector See p. 2-23
To Next Page
Loading...
