Hardware Setup
2-23
D-Bracket™ Connector: JDB1
The mainboard comes with a JDB1 connector for you to connect to D-
Bracket™. D-Bracket™ is a USB Bracket integrating four LEDs and allows
users to identify system problem through 16 various combinations of LED
signals. For definitions of 16 signal combinations, please refer to D-Bracket™
(Optional) in Chapter 1.
Pin Signal
1 DBG1 (high for green color)
2 DBR1 (high for red color)
3 DBG2 (high for green color)
4 DBR2 (high for red color)
5 DBG3 (high for green color)
6 DBR3 (high for red color)
7 DBG4 (high for green color)
8 DBR4 (high for red color)
9 Key
10 N C
JDB1 Pin Definition
JDB1
1 9
2
10
D-Bracket™
Connected to JDB1
Connected to JUSB1
To Next Page
Loading...
