Chapter 3
3-26
Frequency/Voltage Control
This section describes how to set the Chassis Intrusion feature, CPU FSB
frequency, monitor the current hardwae status including CPU/system
temperatures, CPU/System Fan speeds, Vcore etc. Monitor function is available
only if there is hardware monitoring mechanism onboard.
Detect CPU FSB Clock
This setting enables you to detect the CPU Front Side Bus clock frequency.
Setting options: Auto, Manual.
CPU FSB Clock (Mhz)
This setting shows the CPU Front Side Bus clock frequency. Setting option:
default.
CPU: DRAM Clock Ratio
This setting controls the ratio of CPU FSB Clock & DRAM Frequency to
enable the CPU & DRAM to run at different frequency combinations. Please
note that the setting options vary according to the CPU FSB Clock preset.
To Next Page
Loading...
