2-9
Setting BIOS Function
Full Screen LOGO Display
This item enables you to show the company logo on the bootup screen.
Settings are:
[Enabled] Shows a still image (logo) on the full screen at boot.
[Disabled] Shows the POST messages at boot.
Hyper-Threading Technology
The processor uses Hyper-Threading technology to increase transaction
rates and reduces end-user response times. The technology treats the
two cores inside the processor as two logical processors that can ex-
ecute instructions simultaneously. In this way, the system performance
is highly improved. If you disable the function, the processor will use
only one core to execute the instructions. Settings: [Enabled], [Disabled].
Optical Drive AAM
Optical Drive Auto Acoustic Management (AAM) allows you to
reduce the optical drive noise. Selecting [Silent] will minimize the
drive performance and have the lowest noise. [Medium] is default
setting while [Disable] will have the maximum drive performance.
Hard Drive AAM
Hard Drive Auto Acoustic Management (AAM) allows you to reduce
the hard drive noise. Selecting [Silent] will minimize the drive
performance and have the lowest noise. [Medium] is default setting
while [Disable] will have the maximum drive performance.
To Next Page
Loading...
