2-20
Chapter 2
Power Button Function
This feature sets the function of the power button. Settings are:
[Power Off] The power button functions as normal power off
button.
[Suspend] When you press the power button, the computer
enters the suspend/sleep mode, but if the button is
pressed for more than four seconds, the computer is
turned off.
USB Resume From S3
This item allows the USB device to wake up the system from S3 sleep
state. Settings: [Enabled], [Disabled].
Resume By RTC Alarm
The field is used to enable or disable the feature of booting up the sys-
tem on a scheduled time/date.
Date (of Month)
The field specifies the date for Resume By RTC Alarm.
Settings: [0]~[31].
Resume Time(hh:mm:ss)
The field specifies the time for Resume By RTC Alarm.
Format is <hour><minute><second>.
To Next Page
Loading...
