6-12
MS-7125 ATX Mainboard
3. Note that some conflict resolutions may result in the drive letter assignment
changing; for example the RAID set may have been drive D: but after the conflict
resolution, it may become drive E. Be aware of this when performing a conflict
resolution. To maintain the same drive lettering, the SATA cables connected to the
drives may need to be swapped, or in the case of a SATA-based removable drive
unit, the order of the drives within the chassis made need to be changed.
Press ‘Y’ to accept the change and resolve the conflict.
4. The conflict will be resolved. The RAID Set will appear in the Logical Drive
window.
To Next Page
Loading...
Need help?
General
