MSI MS-7596 (v1.x)

BIOS Setup ▍
MS-7596
3-15
BIOS Setup ▍
MS-7596
Power Button Functon
Ths feature sets the functon of the power button. Settngs are:
[Power O󰘯] The power button functons as normal power o󰘯 button.
[Suspend] When you press the power button, the computer enters suspend/
sleep mode, but f the button s pressed for more than four seconds,
the computer s turned o󰘯.
Restore On AC Power Loss
Ths tem spec󰘰es whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[O󰘯] Always leaves the computer n the power o󰘯 state.
[On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
Wake Up Event Setup
Press <Enter> and the followng sub-menu appears.
Wake Up Event By
Settng to [BIOS] actvates the followng 󰘰elds, and use the followng 󰘰elds to set the
wake up events. Settng to [OS], the wake up events wll be de󰘰ned by OS.
Resume From S3 By USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus
-
pend to RAM) sleep state.
Resume From S3 By PS/2 Keyboard / Mouse
These tems determne whether the system wll be awakened from what power sav
-
ng modes when nput sgnal of the PS/2 keyboard/ mouse s detected.
Resume By PCI Devce (PME#)
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PME (Power Management Event).
Resume By PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCIE devce.
Resume By RTC Alarm
The 󰘰eld s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
▶
▶
▶
▶
▶
▶
▶
▶
▶