MSI MS-7640 - BIOS Setup Procedures

En-26
MS-7640 Manboard
BIOS Setup
Ths chapter provdes basc nformaton on the BIOS Setup program and allows you to
con󰘰gure the system for optmum use. You may need to run the Setup program when:
An error message appears on the screen durng the system bootng up, and
requests you to run BIOS SETUP.
You want to change the default settngs for customzed features.
Important
The tems under each BIOS category descrbed n ths chapter are under contnuous
update for better system performance. Therefore, the descrpton may be slghtly
d󰘯erent from the latest BIOS and should be held for reference only.
Upon boot-up, the 1st lne appearng after the memory count s the BIOS verson. It s
usually n the format:
E7640AMS.xxx 041211 where:
1st dgt refers to BIOS type as E = EFI
2nd - 5th dgt refers to the model number.
6th dgt refers to the chpset as I = Intel, N = nVda, A = AMD and V = VIA.
7th - 8th dgt refers to the customer as MS = all standard customers.
xxx refers to the BIOS verson.
041211 refers to the date ths BIOS was released.
Enterng Setup
Power on the computer and the system wll start POST (Power On Self Test) process.
When the message below appears on the screen, press <DEL> key to enter Setup.
Press DEL to enter Setup Menu, F11 to enter Boot Menu
If the message dsappears before you respond and you stll wsh to enter Setup, restart
the system by turnng t OFF and On or pressng the RESET button. You may also
restart the system by smultaneously pressng <Ctrl>, <Alt>, and <Delete> keys.
■
■
•
•